SOLUTIONS FOR SLOPE CONTROL
Mesh MT 6000
MT6000 is a mesh with a breaking load of 6000 (kg/m). Manufactured with high structural performance steels and high corrosion resistance due to its Bezinal alloy coating.
Its use is recommended for control of minor landslides on slopes (less than 0.5 m3), either as a spill control or as a flexible soil nailing system. Its secured edge system allows reducing mesh overlaps to a single frame and allows having an isotropic membrane.
It uses less mass per square meter (lighter), resulting in a mesh that is more operator friendly and it provides greater safety to the reinforced slope.
Uses and Applications
- Slope Stabilization.
Sales Format
Available Coil Dimensions
Adaptable Width |
Adaptable Length |
|---|---|
| From 1.0 mm up to 5.0 mm | From 5.0 mm to 35 mm |
- It allows savings in shotcrete due to its thinner thickness and larger frame, coil widths according to the job site; it avoids losses due to overlapping and it has a lower cost per m2 compared to 10006 and 5008.
- Other lengths and heights can be produced according to customer’s needs.
Characteristics
Geometric Characteristics
Frame opening |
Wire Diameter |
Estimated Weight |
|---|---|---|
|
75 mm ± 7 mm |
3.20 mm ± 0.10 mm |
1.8 kg / m² |
Performance Characteristics
Minimum Wire Breakage Load |
Min. Tensile strength longitudinal axis |
Min. Tensile Strength Transversal axis
|
Minimum Zn Coating (*) |
|---|---|---|---|
| 7.1 Kn | 60 kN / m | 60 kN / m | 150 g / m² |
- It allows savings in shotcrete due to its reduced thickness, coil widths according to the job site; it avoids overlapping losses, and it has a lower cost per m2 compared to other solutions.